Printing images – HP PHOTOSMART 930 User Manual

Page 68

hp photosmart 930 series user’s manual

NOTE

If your computer is running Windows XP, when you

turn on the camera in the next step, a dialog box will
display that requests you to

Select the program to

launch for this action

. Simply click on

Cancel

to close

this dialog box.

Turn on the camera. The HP Image Unload software will
launch on your computer. If you have set the software to
automatically unload the images in the camera, the images
will automatically unload to the computer. Otherwise, in the

Welcome

screen, click

Start Unload

. If there were any

images in the camera that were selected in the

for printing or e-mail, those actions are started after the
images have been unloaded to the computer.

When the unload screen on the computer says

Finished

your images have been saved and shared. You can now
disconnect the camera from the computer.

NOTE

To unload images to a computer that does not have the

HP Photo & Imaging software installed on it, change the

USB Configuration

setting to

Disk Drive

in the

Setup

menu.

See

USB configuration

on page 72. This allows the

camera to appear as another disk drive on the computer
so that you can easily copy the image files from the
camera to the hard drive of your computer.

Printing images

To print images that have been unloaded to the computer, you
can use the HP Photo & Imaging software that was shipped
with the camera.

You can also connect the camera directly to any HP Photosmart
printer or to any other HP printer with a front panel USB port,
then print images selected from the camera

menu or all

images in the camera.