HP d325 Series - Manual (Page 39)

QuickSpecs
HP Business Desktop d325 Series
DA-11642 North America — Version 7 — August 22, 2003 39
Technical Specifications – Optical Storage
48X Combo CD-RW/DVD-ROM
(continued) Data Transfer Modes ATA PIO mode 4 (16.7 MB/s); ATA Multi-word DMA mode 2 (16.7 MB/s); ATA
UltraDMA mode 0 (16.7 MB/s); ATA UltraDMA mode 1 (24 MB/s), mode 2 (33
MB/s); ATA UltraDMA Mode 3 44 Mbytes/s (default)
Cache Buffer 2 MB (minimum)
Startup Time (single) < 7 seconds (typical)
Startup Time (multi-session) < 30 seconds (typical)
Stop Time < 4 seconds
Power Source Four-pin, DC power receptacle
DC Power Requirement 5 VDC ± 5%—100 mV ripple p-p
12 VDC ± 5%—200 mV ripple p-p
DC Current 5 VDC (< 1000 mA typical, < 1600 mA
maximum)
12 VDC (< 600 mA typical, < 1400 mA
maximum)
Total Drive Power
(standby mode) < 2.5 Watt
Audio Output Level 0.7 Vrms (typical)
Configuration Jumper
Block Master, slave, and cable select modes
Data Interface Connector 40-pin, shrouded and keyed, flat ribbon
Temperature (operating) 41 ° to 122 ° F (5 ° to 50 ° C)
Relative humidity (operating) 10% to 90%
Environmental
(all conditions non-condensing)
Maximum wet bulb
temperature (operating) 86 ° F (30 ° C)
Certifications,
Requirements MPC-3 compliant, multi-read requirements, ACA AS/NZS 3548, ANSI C63.4–
1992, ATAPI Spec SFF-8020, ATA Spec X3T9.2, CB Bulletin No. 92A, CSA
C22.2 No. 950-1995, C.I.S.P.R. Pub 22, EMKO-TSE 207/94, TUV or VDE EN60
950, EN60825-1, Microsoft PC2001 certification, Microsoft Logo for Windows
XP, 2000, and NT4
Operating Systems
Supported Microsoft Windows 2000, Windows XP Professional, Windows XP Home