HP d325 Series - Manual (Page 26)

QuickSpecs
HP Business Desktop d325 Series
DA-11642 North America — Version 7 — August 22, 2003 26
Technical Specifications – Communications
Lucent V.90 56K PCI Win Modem Data Transmission V.90/K56flex technology speeds: 56,000 Kbps maximum downstream data,
controllerless
NOTE: 56 Kbps technology refers to download speeds only and requires compatible modems at server sites.
Other conditions may limit modem speed. FCC limitations allow a maximum of 53 Kbps during download
transmissions.
Data Speeds (Upload only) 33,600 / 31,200 / 28,800 / 26,400 / 21,600 / 19,200 / 16,800 /
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 / 1,200 / 300
Data Standards ITU V.90, ITU-T, V.34bis, V.22bis, V.22bis, V.21, V.23, Bell 212A, and Bell 103
Fax speeds 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 / 1,200 / 300 b/s
Fax mode capabilities Group3 FAX, V. 17, V.29, V.27ter, and V.21 Channel 2, Class 1
Error Correction and Data
Compression
V.44 (software upgradeable), 4.2bis, V.42 and MNP2-5
Power Management APM and ACPI states D0, D1, D2, and D3; meets PCI 2.2 requirements and
PC'99 requirements
Upgradability Software driver upgradeable for v.92 and future enhancements
Video ITU-T V.80 video ready interface
Other TIA/EIA 602 standard AT command set
Integrated DTE interface with speeds of up to 115.2 Kbps, parallel 16550a
UART-compatible interface
Optional ring wakeup signal
Operating temperature 32 ° to 104 ° F/0 ° to 40 ° C
Operating humidity 20% to 80%, non-condensing
Power Requires a 3.3-V auxiliary power rail on PCI bus
Uses only one PCI load (i.e., one grant/request pair), one shared IRQ, one
electrical load
Chipset Agere Systems 1648C (Mars 3.2)—Integrated PCI interface with 5-V tolerant
buffers and CardBus support
Dimensions (L X H) Complies with PCI low profile specifications—6.7 x 2.3 inches (17.0 x 5.8 cm)
and supports high- and low-profile brackets
Connection Dual, parallel RJ-11 support with auxiliary Tip/Ring connector
Other features Digital line protection, call progress monitoring via on-board piezo device,
transformer-based DAA design, support for high profile and low profile
brackets, PnP ID supports via external EEPROM
Safety UL recognized to UL 1950, 3rd edition (U.S. and Canada); IEC 950 (TUV,
NEMKO, DEMKO, SEMKO); CE Mark, EC 950 (TUV, NEMKO, DEMKO,
SEMKO, CE mark
EMC FCC Part 15, IC ES003, EN 55022, 3rd edition, EN 55024, annex A, EN 61000-
4-6, EN 61000-4-8
Telecom FCC Part 68, IC-CS-03 (Canada); Worldwide PTT approvals
Health Bare PCB material compliant to 94V-0 or better (marked as such), Microsoft
Windows Me health compliant
Other PC'99 compliant, PCI version 2.2, WHQL approved; support for ACPI revision
1.1,