Inspection, maintenance, and cleaning, Troubleshooting, Please read the following carefully – Harbor Freight Tools 95801 User Manual

Page 9

Page 9

SKU 95801

For technical questions, please call 1-800-444-3353.

INSPECTION, MAINTENANCE, AND CLEANING

WARNING! Make sure air compressor is unplugged and that the Air Hammer

is disconnected from its Air Supply before performing any inspection, maintenance,

or cleaning procedures.

BEFORE EACH USE, inspect the general condition of this tool. Check for loose

screws, misalignment or binding of moving parts, cracked or broken parts, damaged

air hoses, and any other condition that may affect its safe operation. If abnormal

noise or vibration occurs, have the problem corrected before further use.

Do not

use damaged equipment.

MAINTENANCE CHART

Maintenance Type

Before

Use

After

Use

Weekly Monthly Every 6

Months Yearly

Inspect the Air Hammer

for damage

(see #2, above)

Wipe off with clean,

moist cloth

TROUBLESHOOTING

Problem

Possible Causes

Probable Solutions

Air Hammer will

not start

1. Air supply not connected.
2. Air Regulator (11) not turned up.

1. Check air connection.
2. Turn up Air Regulator (11).

Air Hammer starts

but not enough air

pressure.

Possible leak in air supply system.

Check all hoses, connections on air

compressor and all lines running

to the Air Hammer. Replace any

defective or broken parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MAN-

UAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION

OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT,

OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/

OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY

CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING

OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.