Harbor Freight Tools 95801 - Manual (Page 7)

Page 7 SKU 95801 For technical questions, please call 1-800-444-3353.
NOTE: The threads inside the Cylinder (13) are plastic. Do not exert too much
twisting pressure or they can be damaged. The Cylinder should easily twist into the
Housing (1) until snug. See Figures 2 & 3.
3. The Air Hammer is now ready to use as a chisel.
4. To remove, or change chisel heads, simply reverse steps 1 and 2.
USE AS A SCALER
Figure 4
8A 7A 6A 5A 4A
3A 2A 1A 8A
Hex Wrench for Set Screw (included)
Figure 4A
1. Insert the Needles (5A) through the holes in the Needle Holder (4A). There are
nineteen Needles. Make sure all holes are filled before putting the Needle Holder
(4A) through the Spring (3A), the Retainer Clip (2A) and into the Barrel Assembly