Heath Zenith SL-6157 User Manual

Page 5

-5-

595-5345-06

123

45678

12345678

Inside

Transmitter

Transmitter Battery Replacement

Install four alkaline AAA batteries. See
diagram inside push button for correct
battery orientation.

* Code Settings 1-7

Must Match Both

Transmitter and

Chime

Remove screw to

open access door

Back of

Chime

Tune Setting

(Not used on

all models)

Note: Some models might re-
quire the use of tweezers to re-
move and replace the jumpers.

Tune Settings

Your Heath

/Zenith wireless chime has different selectable tunes: Ding (one

note), Ding-Dong (two note), or Westminster (eight note) (Available on se-
lected Heath

/Zenith chimes). The factory setting is for the Ding-Dong tune

(or Westminster, when available). This tune can be changed by following the
instructions below.
•

Ding (one note tune)
Transmitter: Add a jumper to location 8.

•

Ding-Dong (two note tune)
Transmitter: Remove jumper from location 8.
Chime: Remove jumper from location 8.

•

Westminster (Eight note tune) (Available on selected Heath

/Zenith

chimes)
Transmitter: Remove jumper from location 8.
Chime: Add a jumper to location 8.

Note: All models have both front and back door tune capabilities. You may
purchase any Heath

/Zenith wireless push button for a second entrance.