Heath Zenith Lighted Wireless Push Button Accessory - Manual

Lighted Wireless
Push Button Accessory
The Heath ® /Zenith Wireless Push Button Accessory works with existing
Heath ® /Zenith jumper or dip switch systems.
• Battery powered push button - No wires to run.
• 128 selectable codes allow more than one chime system in the same
house.
• LED lighted push bar (see Lighted Push Bar Feature).
© 2007 HeathCo LLC 598-1137-02
(Style may vary from illustration)
Lighted Push Bar Feature
This Heath ® /Zenith wireless push button contains a LED (Light Emitting
Diode) that will illuminate in dark conditions so the push button will be
more visible for your guests. This (patent pending) technology and built-in
photocontrol will allow the light intensity of the push button LED to in-
crease as the outdoor light conditions around the push button decreases.
The actual time and intensity that the LED is visible will depend on the
specific mounting environment of the push button. In nominal conditions
the batteries will typically last 2 years.