Heath Zenith 3035466 (AC-6180) - Manual

-
+
-
+
-
+
Battery
Battery
Battery
© 2007 598-1074-02
This package includes (Style of push button and chime may vary from illustrations):
• Wireless chime
• Wireless push button w/battery
• Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime. In typical use,
alkaline batteries will last up to three years.
Cover
Mounting
Tabs
1. Install alkaline type A23 12
volt push button battery. Re-
move back of case by pushing
in tab on bottom with a small
screwdriver (see Figure 1).
Make sure battery is oriented
properly (See page 4).
2. Install 3 alkaline “D” batteries.
Make sure batteries are oriented
properly (see Figure 2).
3. Test range. Temporarily posi-
tion chime and push button
where you want them mounted.
Press push button to verify
chime and push button work
properly. If chime does not
sound, see Troubleshooting.
Chime
Volume
Jumpers
Figure 2
Figure 1
Decorative
Wireless Chime
Models 3035466 (AC-6180),
3196417 (AC-6182), & 3035490 (AC-6186)