Hitachi VT-FX601A - Manual (Page 16)

PRESET FOR USE - 16 -
CH 01
TUNER SET UP
• The VCR distinguishes between standard TV channels and cable channels.
7 After scanning
The tuner stops on the lowest memorized channel. The TV screen returns to TV mode.
CH 02
• If "TUNER SET UP" appears on the TV screen again, check the cable connections.
Then, press MENU, F.FWD/ or REW/ button once again. The VCR will begin preset
again.
TO SELECT A DESIRED CHANNEL
You can select the desired channel by using CHANNEL or button or directly
pressing number buttons on the remote control.
Note for using number buttons:
•
When selecting cable channels which are higher than 100, press +100 button first,
then press the last two digits. (To select channel 125, first press "+100" button then
press "2" and "5").
• You must precede single-digit channel numbers with a zero (For example: 02, 03, 04
and so on).
SETTING THE CLOCK
Set the clock accurately for proper automatic timer recording. We suggest that you use
a TV or radio station as your time source.
In the example below, the clock is to be set to:
DATE 1st March, 1997
SETTING TIME 5:40PM