Trigger timeout, Trigger timeout -15 – Hand Held Products 4410 User Manual

Page 35

Text mode
Original mode

2 - 15

Trigger Timeout

Use this selection to set a timeout (in quarter seconds) of the Imager’s trigger.
Once the imager has timed out, it must be triggered again either serially (see
"Serial Triggering" on page 2-14), or manually. Set the Trigger Timeout to 00 if
you don’t want a Trigger Timeout.

Default setting = 120 seconds

‡

A one- to three digit number and Save are required after reading this
programming symbol. Refer to the Programming Chart (inside back
cover).

Set Timeout ‡