Hand Held Products 4410 - Manual (Page 150)

7 - 18
Example #4: What are the Imager’s settings for all Codabar selections?
Enter:
cbr?.
Response: CBRENA1[ACK],
CHK0[ACK],
CKX0[ACK],
SSX0[ACK],
MIN2[ACK],
MAX60[ACK],
DFT[ACK].
This response indicates that the Imager’s Codabar Coding Enable (CBRENA) is
set to 1, or on;
the Check Character (CHK and CKX) is set to 0, or No Check Character;
the Start/Stop Character is set to 0, or Don’t Transmit;
the Minimum Message Length (MIN) is 2 characters;
the Maximum Message Length (MAX) is 60 characters;
and the Default setting (DFT) has no value.
Button Bar
The Quick*View button bar and the button functions are shown below.
*This icon only appears if you have Visual Menu software installed. Visual Menu
is available free of charge from the Welch Allyn Data Collection, Inc. website at
http:\\dcd.welchallyn.com/techsprt/download/software.htm.
Full HalfQuarter
Resolution
Capture an image
Open file
Save file
Display Quick*View information
Print active file
Zoom out image
Zoom in image
Capture gray scale image
Capture black & white image
Display firmware revision
Flash a hex file into ROM
Cancel image capture
Display aimer
Start Visual Menu software*