Hatco IMPERIAL "S" - Manual (Page 20)

Form No. EBOOSTERM-0406 18
INSTALLATION
Figure 7. Components Shipped with the Heater Unit
Leg
Mounting Brackets with Hardware
Temperature/Pressure Gauge
Temperature Pressure Relief Valve
One set of four legs supplied with all Imperial and Mini-
Compact Booster Heaters. (All Compact 4-57 kW units
supplied with either a set of legs or mounting brackets.)
Plastic leg, Part No. 05.30.069.00
Stainless Steel, Part No. 05.30.070.00
A set of mounting brackets or a set of legs supplied with
each Compact 4-57 kW booster heater.
Part No. R04.20.030.00
Two temperature/pressure gauges supplied with all
booster heaters.
Part No. 03.01.003.00
One temperature/pressure relief valve supplied with all
booster heaters.
Mini-Compact Series, Part No. 03.02.020.00
Compact & Imperial Series, Part No. 03.02.022.00
Pressure Reducing Valve
Shock Absorber
Blended Phosphate Water Treatment System
Back Pressure Relief Valve
One pressure reducing valve with built-in bypass supplied
with all boosters.
Pressure Reducing Valve, Iron, Part No. 03.02.004.00
Pressure Reducing Valve, Brass (optional),
Part No. 03.02.015.00
An optional shock absorber is available for all electric
boosters.
Part No. 03.40.057.00
An optional blended phosphate water treatment system is
available for all electric booster heaters.
Part No. 03.05.061.00
(Replacement Cartridge Only, Part No. 03.05.061A.00)
An optional back pressure relief valve is available for all
electric booster heaters.
Part No. 03.02.039.00