Technical data – haier MAGNUM 232738 User Manual

Page 28

Technical Data

309477F

Technical Data

dx Roller/Spray System

XR9 Sprayer

Working pressure range

0 - 207 bar, 21 MPa (0 - 3,000 psi)

Electric motor

3.5 AMP (open frame, universal)

4.5 AMP (permanent magnet DC)

Operating horsepower

3/8

7/8

Maximum delivery (with tip)

0.91 lpm (0.24 gpm)

1.44 lpm (0.38 gpm)

Paint hose

7.6 m (25 ft) x 1/4 in.

15.2 m (50 ft) x 1/4 in.

Maximum tip hole size

0.38 mm (0.015 in.)

0.48 mm (0.019 in.)

Weight, sprayer only

6 kg (13 lb)

Weight, sprayer, hose & gun

7.8 kg (17 lb)

Dimensions:

Length

41 cm (16 in.)

49.5 cm (19.5 in.)

Width

46 cm (18 in.)

48.3 cm (19 in.)

Height

53 cm (21 in.)

101.6 cm (40 in.)*

*Height with folded handle is 66 cm (26 in.)

Power cord

3 wire, 1.0 mm

x 2.0 m (78 in.)

3 wire, 1.0 mm

x2.0 m (78 in.)

Fluid inlet fitting

Fluid outlet fitting

1/4 npsm external thread

Inlet screen on suction tube

450 micron (35 mesh)

Wetted parts, pump & hose

stainless steel, brass, ultra-high
molecular weight polyethylene
(UHMWPE), carbide, nylon,
aluminum, PVC, polypropylene,
fluroelastomer

stainless steel, brass, leather,
ultra-high molecular weight
polyethylene (UHMWPE), carbide,
nylon, aluminum, PVC,
polypropylene, fluroelastomer

Wetted parts, gun

aluminum, brass, carbide, nylon,
plated steel, stainless steel,
UHMWPE, zinc

Generator requirement

1500 Watt minimum

Electrical power requirement

220-240 V AC, 50/60 Hz, 1 phase,
10 A

Storage temperature range *

❖

-35° to 71°C (-30° to 160°F)

Operating temperature range

✔

4° to 46°C (40° to 115°F)

When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump.

❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.