Humminbird 767 - Manual (Page 45)

80
Setup Menu Tab
From any view, press the MENU key twice to access the tabbed
Main Menu System, then press the RIGHT cursor key until the
Setup tab is selected.
NOTE: Menu choices will vary depending on system settings such
as whether the unit is set for Advanced User mode and what
accessories are attached to the unit.
Setup Menu Tab
79
Drift Alarm
Drift Alarm sounds when the boat has exceeded the distance
from the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the
size of a perimeter around the boat’s anchored position; if the anchored boat drifts outside of that
perimeter, the Drift Alarm will sound.
To change the Drift Alarm setting:
1. Highlight Drift Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm setting.
(Off, 25 to 3000 feet, 10 to 1000 meters [International Models only], Default = Off)
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief
tone will be produced as you adjust the Alarm Tone so that you can select the tone that you
can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone setting.
(High, Medium, Low, Default = Medium)
Drift Alarm Perimeter
Drift Alarm Circle
531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:30 AM Page 88