Humminbird 767 - Manual (Page 10)

10
Sonar View
Sonar View presents a historical log of sonar returns. Depth is always displayed. Readouts for
temperature and speed are automatically displayed if the appropriate accessory is connected. The
most recent sonar returns are charted on the right side of the window; as new information is
received, the older information is moved across the display to the left. A Digital Depth Readout is
displayed in the upper left corner. A scale with Upper and Lower Depth Range readouts appears
along the right edge of the Sonar View. The scale indicates the distance from the surface of the
water to a depth range sufficient to show the bottom. Depth Range is automatically selected to
keep the bottom visible on the display, although you can adjust it manually as well (see Sonar
X-Press™ Menu). Six additional Digital Readouts display information from optional-purchase
accessories. These information boxes can be customized to show only the information desired
(see Setup Menu Tab, Select Readouts).
NOTE: If the Depth number is flashing, it means that the unit is having trouble locating the bottom.
This usually happens if the water is too deep, the transducer is out of the water, the boat is moving
too fast, or for any other reason that the unit can’t accurately receive continuous data.
Sonar View
Upper Depth
Range
Sonar History
Window
Depth
Cursor
Dialog Box
Temperature
Triplog
Lower Depth
Range
RTS® Window
Cursor
9
Views
The views available on your 700 Series™ Fishing System are:
Sonar views: Navigation views:
• Sonar View • Bird’s Eye View
• Zoom View • Chart View
• 200/83 kHz Split Sonar View • Combo View.
• Big Digits View
• Circular Flasher View
• Screen Snapshot View
• Side Beam View
• WideSide® View.
NOTE: When you change any menu settings that affect the sonar, the view will update
immediately (i.e. you don’t have to exit the menu to apply the change to the screen). For instance,
by switching between "Inverse" and "Structure ID®" from the X-Press
TM menu, it is possible to quickly
alternate between the two viewing methods.
NOTE: Side Beam View and WideSide® View require the purchase of the QuadraBeamTM
transducer for the Side Beam View and the WideSide® transducer for the WideSide® View. You can
visit our website at www.humminbird.com to order these accessories online or contact our
Customer Resource Center at 1-800-633-1468.
Sonar View is the default view. When the VIEW key is pressed, the display cycles through the
available views. When the EXIT key is pressed, the display cycles through the available views in
reverse order. Any view can be hidden or displayed as part of the view rotation using the Views
Menu tab.
531427-1_C - 767_Man_Eng.qxd 10/25/2005 10:29 AM Page 18