HP DL360 - Manual (Page 38)

System Unit Dimensions (HxWxD) 1.65 x 16.75 x 25 in (4.19 x 42.55 x 63.5 cm)
Weight No hard drives installed,
one power supply 26 lb (11.81 kg)
Hard drives installed,
one power supply 28.6 lb (13 kg)
Input Requirements Range Line Voltage 100 to 240 VAC
Voltage 220 to 240 VAC
Rated Input Current 2.80A (110 V) to 1.40A (220 V)
Rated Input Frequency 50 to 60 Hz
Rated Input Power 200 W
NOTE: 308 W of Rated Input Power is for the
Maximum Peak Output Power of 200 W.
BTU Rating 1050 BTUs/hr
NOTE: The BTU Rating
listed is for the Rated
Input Power of 200 W.
Power Supply Output
Power
(per power supply) Maximum Peak Power 200 W
Temperature Range Operating 50° to 95° F (10° to 35° C)
Shipping -22° to 122° F (-30° to 50° C)
Relative Humidity
(non-condensing) Operating 8% to 90%
Shipping 5% to 95%
Maximum Wet Bulb
Temperature
Acoustic Noise Idle
(Fixed Disk Drives
Spinning)
L
WAd
(BELS) 6.5
L
pAm
(dBA) 51
Operating
(Random Seeks to Fixed
Disks)
L
WAd
(BELS) 6.6
L
pAm
(dBA) 52
QuickSpecs
Compaq ProLiant DL360 Generation 2
TechSpecs
DA - 11049 Worldwide QuickSpecs — Version 35 — 9.30.2003 Page 38