Maintenance, Checking the tyre pressure, Check the engine’s cooling air intake – Husqvarna Rider 11 User Manual
Page 32

30
– English
R I D E R
8 5 0
R I D
E R
8 5 0
6008-030
6008-006
Checking the tyre pressure
The tyre pressure should be 60 kPa (0.6 kp/cm
2
) all
round.
To improve driving the pressure on the rear tyres
can be reduced to 40 kPa (0.4 kp/cm
2
).
The maximum tyre pressure is 100 kPa (1.0 kp/cm
2
).
IMPORTANT INFORMATION
Different tyre pressures on the front tyres
will result in the blades cutting the grass
at different heights.
MAINTENANCE
Check the engine’s cooling air intake
Raise the engine cover.
Check that the cooling intake is free from leaves,
grass and dirt.
If the cooling intake is blocked this will interfere with
the cooling of the engine, which can damage the
engine.
This manual is related to the following products: