Husqvarna Rider 11 - Manual (Page 20)

18
– English
2 1
STOP START
Rider 13
Rider 11
N
Rider 13
6007-007
6007-010H
6007-017Hy
6007-003
DRIVING
WARNING!
Never run the engine indoors, in
enclosed or poorly ventilated
areas. The exhaust fumes
contain toxic carbon monoxide.
7. When the engine has started release the igni-
tion key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
IMPORTANT INFORMATION
Do not change gear from forward drive to
reverse while the machine is moving.
The clutch must be used for each gear
change.
Stop the machine before changing for
forward drive to reverse, otherwise the
gearbox can be damaged.
Never use force to engage a gear. If a gear
will not engage directly release and push
down the clutch again, and then try to
engage the gear again.
Driving the machine
1. Release the parking brake by pressing down the
brake pedal.
2. For Rider 13 and Rider 13 Bio
Carefully press down one of the pedals until the
correct speed is reached.
To drive forwards: press down pedal (1).
To reverse: press down pedal (2).
For Rider 11 and Rider 11 Bio
Press the clutch and engage the required gear.
To engage reverse gear the lock button must be
pressed down.
• Gears 1–4 are used for mowing.
• Gears 4–5 are used for transport.
Starting is possible irrespective of which gear is
engaged.