HP 370 Series - Manual (Page 22)

Do not touch here
Insert the cartridge
1 If you are replacing a cartridge,
push down and pull outward on the
cartridge in the cradle to remove it.
2 Hold the replacement cartridge with
the label on top. Slide the cartridge
at a slight upward angle into the
cradle so the copper-colored
contacts go in first. Push the
cartridge until it snaps into place.
3 Close the print cartridge access door.
The idle screen of the printer displays an
icon showing the approximate ink level
for the installed cartridge (100%, 75%,
50%, 25%, and nearly empty). No ink-
level icon appears if the cartridge is not
a genuine HP cartridge.
Each time you install or replace a print
cartridge, a message appears on the
printer screen asking you to load plain
paper so the printer can align the
cartridge. This ensures high-quality prints.
Align the cartridge
1 Load paper in the In tray and press
OK .
2 Follow the onscreen instructions to
align the cartridge.
See Aligning the print cartridge .
Chapter 2
Insert or replace the print cartridge (continued)
18 HP Photosmart 370 series