Hoover Z 400 - Manual (Page 23)

Hand-held Cleaner
cord to cleaner
Push end of electrical cord firmly
into receptacle at the rear of
cleaner handle. Plug cord into
electrical outlet. Push ON/OFF
switch forward to turn cleaner
“ O N ” .
Using multi-purpose
nozzle
The multi-purpose nozzle has
been built into the front of the
cleaner for added convenience. It
is designed for use on carpet,
rugs, bare floors, upholstered
furniture, mattresses, clothing,
automobile interiors and carpeted
stairs.
Maintenance
The following sections are concerned with proper maintenance of the
cleaner.
Familiarize yourself with the home maintenance tasks in the
following sections. Keep this owner’s manual in a convenient place
where you can refer to it when needed. Proper use and care of your
cleaner will assure continued cleaning effectiveness.
The dust cup
The dirt picked up by the cleaner
is deposited into the dust cup.
Empty dust cup after each use.
The dust cup may be cleaned with
a damp cloth or rinsed with water
when necessary. Cup must be
completely dry before re-using.
How to empty dust cup
Disconnect cleaner from electri-
cal outlet.
1. Hold cleaner in a vertical posi-
tion as shown.
22