How to replace power drive belt – Hoover Z 400 User Manual

Page 19

13. Lift and snap retaining clips

into place.

How to replace Power Drive belt

Disconnect cleaner from electrical outlet before replacing belt.

To replace the (small) Power Drive belt it is necessary to first remove the

bottom plate, agitator and the larger agitator belt.

Note: It may not be necessary to change both belts at one time.

The Power Drive belt is replaced
by placing the belt around the
motor pulley first, then the drive
pulley.

Lettering on belt should be

and not against pulleys.

Replace the agitator belt and bot

tom plate, following instruction

previously given.