Easy menu – Hitachi CP-D10 User Manual

Page 24

EASY MENU

From the EASY MENU, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.

Item

Description

ASPECT

Using the ◄/► cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (

29).

• The on-screen menu might be displayed outside of the image
display area depending on the adjustment value of the ASPECT,
D-ZOOM and KEYSTONE. Changing the values of ASPECT,
D-ZOOM and KEYSTONE may ﬁx the symptom.

D-ZOOM

Using the ◄/► cursor buttons adjusts the magniﬁcation ratio.

Small

Large

See the D-ZOOM item in the SETUP menu (

34).

KEYSTONE

Using the ◄/► cursor buttons corrects the vertical keystone distortion.
See the KEYSTONE item in the SETUP menu (

34).

PICTURE MODE

Using the ◄/► cursor buttons switches the picture mode.
The picture modes are combinations of the GAMMA and the COLOR
TEMP settings. Choose a suitable mode according to the projected source.

NORMAL

CINEMA

DYNAMIC

BOARD(BLACK)

DAYTIME

WHITEBOARD

BOARD(GREEN)

GAMMA

COLOR TEMP

NORMAL

1 DEFAULT

2 MID

CINEMA

2 DEFAULT

3 LOW

DYNAMIC

3 DEFAULT

1 HIGH

BOARD(BLACK)

4 DEFAULT

4 Hi-BRIGHT-1

BOARD(GREEN)

4 DEFAULT

5 Hi-BRIGHT-2

WHITEBOARD

5 DEFAULT

2 MID

DAYTIME

6 DEFAULT

6 Hi-BRIGHT-3

• When the combination of the GAMMA and the COLOR TEMP
differs from pre-assigned modes above, the display on the menu
for the PICTURE MODE is “CUSTOM”. Please refer to the GAMMA
and the COLOR TEMP (

26, 27) items in the PICTURE menu.

• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.

(continued on next page)