Hitachi CP-D10 - Manual (Page 22)

22
POWER
TEMP
LAMP
MENU INPUT STANDBY/ON
Operating
1. To start the MENU, press the MENU button. The MENU you last used (EASY
or ADVANCED) will appear. The EASY MENU has priority to appear just after
powered on.
Using the menu function
2.
(1) Use the ▲/▼ cursor buttons to select an item to
operate. If you want to change it to the ADVANCED
MENU, select the ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
This projector has the following menus:
PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, SECURITY and
EASY MENU.
The EASY MENU consists of functions often used, and the other menus are
classified into each purpose and brought together as the ADVANCED MENU.
Each of these menus is operated using the same methods. While the projector
is displaying any menu, the MENU button on the projector works as the cursor
buttons. The basic operations of these menus are as follows.
In the EASY MENU
MENU button
(Cursor buttons)
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET
COMPUTER MY SOURCE/
AUTO
MAGNIFY PAGE UP VOLUME
DOWN ࡯
ON
OFF
㧗 FREEZE
RESET button
ENTER button MENU button
Cursor buttons
POSITION
ESC
ENTER
MENU
RESET
ESC button
(continued on next page)
INPUT button
(1) Use the ▲/▼ cursor buttons to select a menu.
The items in the menu appear on the right side.
If you want to change it to the EASY MENU,
select the EASY MENU.
(2) Press the ► cursor (or the ENTER) button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
(or the ENTER) button to progress. The operation menu or dialog of the
selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU