Hitachi CP-D10 - Manual (Page 19)

19
Operating
1. Press the POSITION button on the remote control while no
menu is on screen, to display the D-SHIFT dialog on screen.
Adjusting the position
2. Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the POSITION button again to finish this operation.
● This is a function to shift the position of the shrunken picture by the D-ZOOM
function.
● When an OSD (On Screen Display) menu is displayed, this operation moves
the position of the OSD menu, but the picture position is not (
23).
● The D-SHIFT adjustment values are not valid when the D-ZOOM is set to 512
(full screen).
1. Press the AUTO button on the remote control.
Pressing this button performs the following.
Using the automatic adjustment feature
For a computer signal
The vertical position, the horizontal position and the
horizontal phase will be automatically adjusted.
Make sure that the application window is set to its maximum
size prior to attempting to use this feature. A dark picture
may still be incorrectly adjusted. Use a bright picture when
adjusting.
For a video signal and s-video signal
The video format best suited for the respective input signal will be selected
automatically. This function is available only when the AUTO is selected for
the VIDEO FORMAT item in the INPUT menu (
32). The vertical position
and horizontal position will be automatically set to the default.
● The automatic adjustment operation requires approx. 10 seconds. Also
please note that it may not function correctly with some input.
● When this function is performed for a video signal, a certain extra such as a
line may appear outside a picture.
● When this function is performed for a computer signal, a black frame may be
displayed on the edge of the screen, depending on the PC model.
● The items adjusted by this function may vary when the FINE or DISABLE is
selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu
(
45).
AUTO button
For a component video signal
The vertical position and horizontal position will be automatically set to the
default. The horizontal phase will be automatically adjusted.
VIDEO DOC.CAMERA
KEYSTONE
ASPECT SEARCH BLANK
MUTE MY BUTTON
POSITION
1 2
MENU
COMPUTER
MY SOURCE/
AUTO
MAGNIFY PAGE
UP
VOLUME
DOWN
࡯
ON
OFF
㧗
FREEZE
POSITION button
KEYSTONE MUTE MY BUTTON
POSITION
1 2
ESC
ENTER
MENU
RESET