Setting up the monitor, Installing the monitor pedestal – HP FP7317 User Manual

Page 12

Text mode
Original mode

User’s Guide

3–1

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the
monitor, computer system, and other attached devices, then
follow the steps below.

Installing the Monitor Pedestal

To install the monitor pedestal:

1. Place the pedestal plate on your desktop or table and check to

be sure the arrow on the underside of the plate is facing
forward.

Do not install the base if the monitor will be used on a wall,
swing arm, or other mounting fixture; instead see the section on
“Mounting the Monitor” in this chapter.