Quickspecs, Hp xw4600 workstation – HP xw4600 User Manual

Page 69

Sleep

2 watts

Off

0.05 watts

0.06 watts

0.25 watts

Heat Dissipation

AC Input
Voltage at 100
VAC +/- 5
VAC, 50 Hz
+/- 3 Hz

AC Input
Voltage at 115
VAC +/- 5
VAC, 60 Hz
+/- 3 Hz

AC Input Voltage
at 230 VAC +/- 5
VAC, 50 Hz +/- 3
Hz

Normal Operation

350.8 BTU/hr 347.0 BTU/hr 342.6 BTU/hr

Sleep

6.8 BTU/hr

Off

0.2 BTU/hr

0.9 BTU/hr

NOTES

This sleep status ignore the input sync signal check cycle when metering the

model in sleep mode.

Heat dissipation is calculated based on the measured watts, assuming the

service level is attained for one hour.

Longevity and Upgrading

Longevity and Upgrading Upgradeability features contained in the product

include:
One upstream and four downstream USB ports

Ergonomics

The monitor meets the ergonomic requirement of
EN-ISO 13406-2 for flat panel displays.

Additional Information

This product is in compliance with the Restrictions of
Hazardous Substances (RoHS) Directive,
2002/95/EC.

This HP product is designed to comply with the
Waste Electrical and Electronic Equipment (WEEE)
Directive, 2002/96/EC.

This product is in compliance with California
Proposition 65 (State of California; Safe Drinking
Water and Toxic Enforcement Act of 1986).

This product is in compliance with the IEEE 1680
(EPEAT) standard at the SILVER level, see
www.epeat.net.

Plastics parts weighing over 25 grams used in the
product are marked per ISO 11469 and ISO1043.

Display meets the requirement for low frequency
electromagnetic fields per MPR-II, TCO, and
prEN50279 A/B/C.

This product contains 0% recycled materials (by wt.)

This product is 97.6% recycleable when properly
disposed of at end of life.

Packaging Materials

Corrugated Paper 2.19 kg
PE-LD Bags 0.09 kg
EPS Molded Foam 1.07 kg

QuickSpecs

HP xw4600 Workstation

Technical Specifications - Monitors

DA - 12792 Worldwide — Version 1 — October 1, 2007

Page 69