Honeywell RCA902N - Manual (Page 9)

RCA902A
7 69-2157EFS—05
Installing the Motion Detector
NOTE: Before fixing the motion detector unit to the mounting surface, it is advisable
to check that the system works correctly (i.e. that the detector and receiver are within
radio range of each other) by temporarily operating the motion detector in the chosen
location.
• Open the detector by inserting a flat bladed
screwdriver into the slot at the base of the unit
and pushing gently to release the catch and to
allow the front cover to be opened.
• Set the Day/Night operation switch according to
whether you wish the detector to work with chime
or switching receiver. To work with chime, set the
switch to Day, to work with switching receiver, set
the switch to Night.
MOTION
DETECTOR
M27295
DUSK
AND TIME
CONTROLS
DAY/NIGHT
OPERATION
MODE SELECTOR
SWITCH
BATTERY
FIXING HOLES
Fig. 3
69-2157EFS_C.indd 7 9/22/2008 11:53:59 AM