Honeywell RCA902N User Manual
Page 20
Installation Instructions
69-2157EFS—05
18
Troubleshooting
If your wireless system fails to work properly, complete the relevant test or tests
which follow. Also refer to the trouble shooting guide in your Chime or Switching
Receiver manual.
Motion Detector does not detect movement…
• Check that the battery in the detector is not exhausted.
• Detection is set incorrectly.
Motion Detector does not activate Chime at all…
• Check that the battery in the detector is not exhausted.
• Make sure you use new batteries.
• Check that the sound on the Chime is switched ON.
• Check that the Receiver has correctly learned the detector identification code by following the
test procedure. If necessary reset the Receiver and relearn the code.
Motion Detector activates Chime during the night and not during the day…
• Check that the detector operating switch is set to the DAY position.
69-2157EFS_C.indd 18
9/22/2008 11:54:05 AM