HP mp3220 series - Manual (Page 26)

26 User’s Guide
Setting Up
Making Basic Adjustments
This section provides instructions on making basic adjustments to the projector.
■ “To aim the projector” on page 26
■ “To adjust the focus and zoom” on page 27
To aim the projector
■ To raise the projected picture on the screen, press the height adjustment button 1
and lift the front of the projector to the desired display angle 2 . Release the
button to lock the adjustment.
■
To lower the projected picture, press the height adjustment button while lowering
the front of the projector. Release the button to lock the adjustment.
■
To store the projector, press the height adjustment button and lower the projector
fully, then release the button.
When you tilt the projector up or down, the sides of the picture might become slanted.
To adjust the picture so the sides are vertical, see “To adjust a slanted picture” on
page 33.
If the picture is not level on the screen, screw the adjustable back foot in or out to level
the projector.
1
2