Horizon Fitness SEMI-RECUMBENT 207 - Manual (Page 40)

Your Horizon Fitness semi-recumbent bike is designed to be reliable and mainte-
nance free. However, if you do experience problems with your semi-recumbent bike,
please reference the troubleshooting guide listed below.
PROBLEM:
There is no display on the console.
SOLUTION:
Remove the console and verify that the console cable is attached prop-
erly, making sure that the cable is securely inserted into the console.
PROBLEM:
The semi-recumbent bike makes a squeaking or chirping noise.
SOLUTION:
Loosen all bolts attached during the assembly process, grase the
threads and tighten again.
PROBLEM: The resistance levels seem to be incorrect, seeming too hard or too easy.
SOLUTION:
Reset the console and allow the resistance to reset to the default posi-
tion. Restart the console and retry the resistance levels.
TROUBLESHOOTING YOUR SEMI-RECUMBENT BIKE
PROBLEM:
There is no heart rate reading
SOLUTION:
If you are using the chest strap, there may be a poor connection
between the electrodes and the skin. Remoisten the electrodes with water.
SOLUTION:
The chest strap may not be positioned properly. Reposition the chest
strap. It may be necessary to experiment with the fit and position of the chest strap.
SOLUTION:
Verify that the distance between the chest strap and the console is not
beyond the recommended range of 36 inches.
SOLUTION:
The battery in the chest strap may be dead. Take the chest strap to a
jewelry store or return to Horizon Fitness for a battery replacement.
H E A R T R A T E T R O U B L E S H O O T I N G
SEMI-RECUMBENT SERIES 39