Hoover Limited - Manual (Page 7)

12
How to use
The cleaner can also be moved by
lifting it as shown.
under low furniture. Step on handle
release lever to lower handle.
Transporting
cleaner
To move your cleaner from room to
room, put handle in upright position,
tilt cleaner back on rear wheels, and
push forward.
Handle positions
The handle of your cleaner has
three positions;
upright for storage
and when using cleaning tools;
operating for general operation on
carpet and floors; low for reaching
into “cup” in tool rack for maximum
suction on floors.
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.
To turn cleaner on, push switch up.
To turn cleaner off, push switch
down.
Plug cord into electrical outlet. Turn
cleaner on and, with handle
in upright position, pull back on
handle until front of cleaner is
lifted off the carpet. This insures
that the paper bag is inflated.
Hose end must be firmly pushed
22
21
20
3
1
2
3
4
5
6
9
8
7
10
11
12
13
14
15 16
17
18
19
The assembled cleaner will look like
the drawing below.
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord around
hooks for storage. The top hook
can be rotated right or left for easy
cord release.
4. Furniture nozzle
5. Dusting brush
6. Crevice tool
7. Tool cover (some models only)
8. Bag door latch
9. Bag door
10. Check bag indicator (some
models only)
11. Stair cleaning handle
12. Cleaner body
13. Nozzle control knob
14. Furniture guard
15. Headlight
16. Hood
17. Hose door
18. Hose
19. Extension wand
20. Extra belt storage
21. Extra bag storage
22. Handle release lever
Cleaner
description
Operate cleaner only at voltage
specified on data plate on bottom of
cleaner.
11