Husqvarna 2003-06 - Manual (Page 34)

English-
35
MENU FUNCTIONS
4. Settings
Via this option in the main menu you access the avail-
able settings. Select among the submenus:
• Security (4-1)
to make settings concerning the PIN code, stop
protection, settings lock and alarms. The PIN code
must be stated for the ”Security” menu to be shown.
All security and theft protection functions must be
activated manually when Auto Mower is new.
• Sounds (4-2)
to adjust the sound level for the functions blade
start-up, operation, charging, fault messages and
keypad.
• User info level (4-3)
to determine the level of detailed for information
shown on the display when Auto Mower is opera-
tional.
• Language (4-4)
to select the menu language.
• Time and date (4-5)
to set the current time and day as well as the
require time and date format.
Security (4-1)
• PIN code (4-1-1)
Via this function you can change your PIN code at
any time.
• To change the PIN code: Move the cursor to
”PIN code” and press YES. Place the Auto
Mower in the charging station. Enter the new
PIN-code and press YES. Enter the same code
again to confirm and press YES.
When the PIN-code has been changed, the
message ”PIN-CODE CHANGED” is displayed
for a few seconds. The ”Security” menu will then
appear again.
Security
Sounds
User info level
Language
Time and date
Commands
Timer
Installation
Settings
4-
Security
Sounds
User info level
Language
Time and date
4-1
PIN code
Time lock
Stop protection
Settings lock
4-1-