Hitachi UT42V702 - Manual (Page 38)

37
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)
Advanced Setting
Select "Setup" from the Menu list.
Selected Items Setup hint
Video Power Save
Off
See 42 for details.
On
RGB Input
RGB
Select the effective signal.
Composite
Color System
Auto
This function is available only if D-sub 15 pin - composite
cable is used.
Selects the color system depending on the input signal.
Generally, select [Auto] to receive all signals.
If the input signal has too much noise, the signal level is
too low or the operation is unstable in [Auto], select the
system according to the color system of the input signal.
Composite input only.
PAL
SECAM
NTSC 4.43
NTSC 3.58
PAL60
PAL-M
PAL-N
NOTE
Watching through the optional D-sub 15 pin - composite cable
If your external equipments do not have an HDMI terminal or a DVI terminal,
you can watch images from your external equipments through the optional D-sub 15 pin - composite cable.
1. Connect to your external equipment with the optional D-sub 15 pin - composite cable. (See 19 .)
2. Switch to RGB input by pressing the or button.
3. Press the button and select “Setup” from the menu list.
4. Then you can select “Composite” in “RGB Input”.
Setup
Video Power Save Off
RGB Input Composite
Color System Auto
VCXXX-XXX XX-X
Select On/Off Return
NOTE
Checking Software Version
The Software Version is displayed on Setup(HDMI/Composite) menu.
Software Version
Setup
Video Power Save Off
RGB Input Composite
Color System Auto
VCXXX-XXX XX-X
Select On/Off Return