Hitachi UT42V702 - Manual (Page 15)

14
ENGLISH
QUICK START GUIDE (continued)
Insert the Batteries into the Remote
Control...
17
Power On...
22
q
Connect the plug into the wall socket after all other
connections are completed.
CAUTION
Ensure that both ends of the power cord are easily
accessible.
The Main Power Switch is factory set to On
(activated), therefore after you connect the plug into
the wall socket, the color of the indicating lamp must
turn Green and the Illumination Lamp turns Blue.The
image will display on screen.
Once the
Main Power switch is on, you can turn On/
Off by pressing the Power (On/Off) button on the
remote control.
Language Selection
The initial language setting for on-screen displays is English (US).
You can change to your preferred language.
q
Press the button to display Main Menu.
w
Select “Language” using the
◄►
button.
e
Select the language you prefer from the list using the
◄►
button and then
press the
OK
button.
5
Language
ޓޓޓޓޓEnglish
ޓޓޓޓޓEnglish (US)
ޓޓޓޓޓFrançais
ޓޓޓޓޓEspañol
ޓޓޓޓޓDeutsch
ޓޓޓޓޓᣣᧄ⺆
ޓޓޓޓޓޓ૕ਛᢥ
ޓޓޓޓޓ❥㜚ਛᢥ ޓޓޓޓޓ
Select OK Set Return
3
4
AC
Wall
Socket
Monitor
Rear
Panel
Main Power Switch
(on the underside)
Front
Rear
Illumination Lamp Indicating Lamp