Hitachi UT42V702 - Manual (Page 37)

36
ENGLISH
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)
Making the Moving Image Smooth
Using this function helps to make the moving image smooth.
Select "Picture" from the Menu list.
Selected Items Setup hint
Film Mode
Off
This helps to make the moving image smooth.
Original : Automatically identifies the source of movie (3:2
pulldown, 2:2 pulldown) and faithfully reproduces
the original film images.
Smooth1: Automatically identifies the source of movie (3:2
pulldown, 2:2 pulldown) and reproduces the
smooth motion.
Smooth2: Reproduces the clear moving image when the
input signal is 50Hz or 60 Hz.
Off: Set to Off if the image does not look natural.
This is not available in the following cases.
OSD is displayed.
"Game Mode" is On.
Original
Smooth1
Smooth2
NOTE
About "Film Mode"
The image might not look natural depending on the image contents.
Phenomena such as
q
When switched to the subtitles of a film or images, the image displays fine horizontal streak lines.
w
When switched to scenes such as commercial and animation, the image displays fine horizontal streak lines.
e
When displaying a ticker or subtitle, the text on the image becomes rough (aliasing).
r
When watching the image in Composite mode, which is connected to any external equipment, the OSD of
external equipment displays fine horizontal streak lines.
These phenomena occur due to the method of converting the image. Please note that this is not a malfunction. In
the event that this is disturbing, please set to Off.
In addition, the effect of this menu might vary depending on the aspect setting (See 40 ).
Also, this might be ineffective depending on the scene of the image.
Picture Dynamic
Deep color Off
Contrast Mode Normal
3D Color Management Off
Black Enhancement Off
DNR Off
MPEG NR Off
Cross Color NR Off
Game Mode Off
Film Mode Off
3D Comb Filter Off
Reset Reset
Select OK Set Return