Basic operation power on/off – Hitachi UT42V702 User Manual

Page 23

ENGLISH

BASIC OPERATION

Power On/Off

Turn On the power of the unit.

To turn On the power to the unit:

1. Press the Main Power switch on the unit.

The Indicating Lamp illuminates in Green, and the

Illumination Lamp turns Blue.
The image will display on screen.

2. Once the Main Power switch is on, you can turn On/Off by

pressing the

Power (On/Off) button on the remote control.

To turn Off the power to the unit:

1. Press the Power (On/Off) button on the remote control.

The image disappears from the screen. The Indicating

Lamp turns

Red (Standby mode), and the Illumination

Lamp turns off.

2. Press the Main Power switch on the unit to completely turn

Off the power to the unit.

NOTE

While the Indicating Lamp illuminates in Red (Standby mode),

you can turn On/Off by pressing the

Power (On/Off) button on

the remote control.

The Indicating Lamp/Illumination Lamp Status

Indicating

Lamp

Illumination

Lamp

Power Status

Remark

Off

–

Off

–

Red

–

Standby mode

–

Green

Blue

–

Orange

–

Power Save mode

Refer to

and

for the condition.

Blinking Green

Blue

Receiving Remote Control signal

NOTE

If the image does not appear on the screen at all, or if there is any problem with it, see “TROUBLESHOOTING” on

. This may help you to solve the problems.

After turning On, it takes about 6 seconds until the monitor starts up. Please note that buttons on the remote control

and the unit (such as the Power button) do not work during this period of time.

If power is interrupted during use of the unit, to avoid sudden surges of electricity when the power comes back on,

turn off the main power to the unit before leaving home.

Main Power Switch

(on the underside)

Front

Rear

Power On/Off button

Illumination Lamp

Indicating Lamp