haier L24K3 - Manual (Page 20)

Specification and Format
LED -LCD television Owner’s Manual 19
Function Menu
Function Menu Set
Press A MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu, and
then press
3 /  to select the Time menu.
Press B
5
/
6
to select the option to be adjusted,
and then press 3 /  to adjust it.
Language ▲
Two languages (i.e. Simplified Chinese and English)
are available for your choice.
Menu timeout ▲
The option is for adjusting the menu display
time. Press 3 /  to set the desired time
Picture Optimize ▲
Press •
5
/
6
to select the Picture Optimize option.
Press •  to enter the submenu.
Press •
5
/
6
to select theDCDI/DNR/3D Comb
Filter to be adjusted, and then press 3 /  to
select ON or OFF.
Press •
5
/
6
to select the Color Management to
be adjusted, and then press 3 /  to select Low/
Medium/High/ Off.
menu
DCDI
DNR
Color Management
3D Comb Filter
Picture Optimize
On
Low
On
On
Tuning Sound
Blackground ▲
Press 3 /  to set ON or OFF, if you select ON, the TV
screen will be black if no signals are available.
Black Stretch ▲
Adjust Menu
The TV can be used as a display, and you may adjust
relevant settings. Press SOURCE to switch the signal
input to PC mode.
Press A MENU to display the screen main menu, and
then press 3 /  to select the Adjust menu as
shown in the below figure.
menu
Image Position
H-Size
V-Size
Auto Adjust
Clock
Phase
Reset
Tuning Sound
5
5
128
0
Press B
5
/
6
to select the option to be adjusted.
Press C 3 /  to adjust it.
Image Position ▲
This is used to adjusting H-Position and V-Position.
H-Size ▲
Vertical and Horizontal position of picture can be ▲
adjusted in this item.
V-Size
▲
Vertical and Horizontal position of picture can be ▲
adjusted in this item.
Auto Adjust ▲
Vertical and Horizontal position of picture can be
adjusted in this item.
Clock ▲
This is used for adjusting the phase of pixel clock in
PC mode.
Phase
▲
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Reset ▲
Return to factory default settings.