haier L24K3 - Manual (Page 18)

Specification and Format
LED -LCD television Owner’s Manual 17
Designed the sound to best suit music programs.
Theater ▲
Enables extra bass and treble to enhance the movie
experience.
You can also press S.MODE button on the remote control
to select User / Standard / Music / Theater mode.
How to customize your own audio
status
Press A MENU to display main menu on the screen,
and then press 3 /  to select the Audio icon,
afterwards press
5
/
6
to enter the option to be
adjusted.
Press B 3 /  to adjust.
menu
Volume
Balance
Digital tone
SRS TS XT
AVL
MAXX Bass
Reset
Off
Off
Low
Standard
50
0
OK
OK
Tuning Sound
Volume ▲
Press 3 /  to adjust the volume of a TV program.
Balance ▲
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
The intermediate value is 0. When indication value
of Balance increases toward 50, sound of the right
and left speakers becomes stronger and weaker,
respectively. When indication value of Balance
decreases toward -50, sound of the right and left
speakers becomes weaker and stronger.
Digital tone ▲
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Theater).
If the User mode is selected, press OK to enter the
digital tone menu,(as shown in the below figure),
and then press
3 /  to select a benchmark in the
range of 50~15K from bass to treble, afterwards press
5
/
6
to adjust, if a different benchmark is selected
for adjustment, the original adjustment data will be
automatically cleared.
menu
Standard
Music
Theater
User
Digital tone
Tuning Sound
+6db
0
-6db
50 75 100 300 1K 3K 5K 10K 15K
SRS TS XT ▲
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV’s speakers.
AVL (Automatic Volume Limit) ▲
This will reduces the differences in volume level
among broadcasters.
MAXX Bass ▲
To adjust the super bass. Press 3 /  to select super
bass off, low or high Medium.
Reset ▲
Return to factory default settings.
Timer Functions
Setting of Current Time
The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV's clock is consistent with the standard
time of your time zone; if not, adjust the clock as follows:
Press A MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu,
and then press
3 /  to select the Timer menu,
afterwards press
5
/
6
to select the Current Time
option.
Press B 3 /  to set hour and minute.
Press C
5
/
6
to adjust the time.
After finishing time setting, press D OK or MENU to confirm.