haier L24K3 - Manual (Page 15)

Troubleshing and Specification
14 LED -LCD television Owner’s Manual
Search ▲
Press
5
/
6
to select the Search option, and finally
press 3 /  to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU.
Fine Tune ▲
Press
5
/
6
to select the Fine Tune option, and
then press 3 /  to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Color system
▲
Press
5
/
6
to select the Color Systems option,
and then press 3 /  to select correct color
system.
The TV is designed with three systems for your
choice, i.e. Auto,
Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
Sound system ▲
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Gen ly, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip ▲
When the skip is set ON, the channel will be
skipped when pressing CH ∧ or CH ∨ and only can
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
3 /  to set Skip as Off.
Automatic search
Press A MENU on the remote control to display main
menu, and then press 3 /  to select Tuning
menu. (Note: Only when Tuning Lock in the H. Lock
menu is Off can the Channel menu be selected.)
press B
5
/
6
to select the Auto Search option, press
OK to enter the auto search menu, afterwards press
3 /  to select the Confirm option, and finally press
OK to confirm the starting of auto search.
menu
Tuning Sound
During auto search, the scale value on the progress C
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
menu
Auto Search
Found Channel(s):2
Frequency:25NHz
40%
Cancel
Tuning Sound
Auto Searching
Exchange
Press A MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press 3 /  to select Tuning menu.
Press B
5
/
6
to select the Prog. Exchange option,
and then press OK to enter its submenu.
Press
C
5
/
6
to select the To Channel option, and