Husqvarna 316 - Manual (Page 4)

3
ENGLISH
TECHNICAL SPECIFICATIONS
1
5
L
inch inch/mm inch/mm
° ° ° inch/mm inch/cm/dl
S 36 3/8 "
Oregon 91Vg
.050/1,3 5/
32
" / 4,0 85° 30° 0° .025/0,65 14 " /34/52 16 " /38/56
Motor 1600
Rated voltage V AC 110-120
Rated output W 1600
Frequency Hz 50/60
Ampere A 13
Slip clutch Yes
Mechanical overload protection Yes
Weight
Without guide bar and chain kg 3.8
With 14" guide bar and chain kg 4.4
Chain lubrication
Oil tank volume litres 0.1
Oil consumption approx. litres 0.1/20 min.
Oil pump auto
Noise levels
Equivalent noise intensity at operator's ear,
according to international standards
dB(A) 81
Noise emissions
Sound power, measured: L W dB(A) 102
Sound power, guaranteed L WA dB(A) 103
Vibration
Front handle m/s 2 4.5
Rear handle m/s 2 7.0
Chain/guide bar
Recommended bar length inches/cm 12/30
inches/cm 14/35
inches/cm 16/40
Effective cutting length inches/cm 12/30
inches/cm 14/35
inches/cm 16/40
Chain speed, unloaded m/sec. (drive) 14 (6 tooth)
Chain speed, rated output m/sec. (drive) 14 (6 tooth)
Chain pitch inches 3/8"
Gauge inches/mm .050"/1.3
Number of drive links 12"/14"/16" 45/52/56
12"/30/45 14"/35/52
16"/40/56