beautypg.com

Husqvarna 316 User Manual

Page 16

background image

Filling chain oil

All our chain saw models feature automatic chain lubrication.

Checking automatic chain lubrication system

Start the chain saw and point the guide bar towards a fixed, light-coloured object
at a distance of approximately 20 cm. After running the saw for a minute, a streak
of oil spatter should be clearly visible on the light surface.

A full reservoir is sufficient for 20 minutes of steady use.

If the lubrication system does not seem to be working, and the following
steps do not help, take your saw to a service dealer.

- Check the guide bar's oil passage and clean if necessary.

- Check guide bar groove and clean if necessary.

- Ensure that the nose sprocket turns easily and is not clogged.

Clean and grease if necessary.

Checking chain wear

Inspect chain every day for:

- Visible cracks in rivets or links.

- Stiffness.

- Abnormal wear in rivets or links.

- Min. 3 mm (1/8") horizontal cutter length.

- Any deviation on any of these points indicates a worn chain which must

be discarded.

Checking drive sprocket

Check drive sprocket wear regularly and replace when wear becomes excessive.

15

ENGLISH

min 3 mm

(1/8")