Supported mounting options – HP t5135 User Manual

Page 26

Slide the side of the mounting device attached to the thin client (1) over the other side of the
mounting device (2) on the device on which you want to mount the thin client. An audible 'click'
indicates a secure connection.

Figure 5-4

Connecting the thin client

NOTE

When attached, the HP Quick Release automatically locks in position. You only need to

slide the lever to one side to remove the thin client.

CAUTION

To ensure proper function of the HP Quick Release and a secure connection of all

components, make sure both the release lever on one side of the mounting device and the
rounded opening on the other side face upward.

Supported mounting options

The following illustrations demonstrate some of the supported and not supported mounting options for
the mounting bracket.

●

You can mount a thin client between a flat panel monitor and the wall.

Figure 5-5

Thin client mounted with flat panel on wall

Chapter 5 Mounting the thin client

ENWW

This manual is related to the following products:

t5530