Hitachi UT32A302 - Manual (Page 43)

42
ENGLISH
FUNCTION (continued)
Power Save Mode
When HDMI/Composite Input is Selected
You are provided the function to save power consumption when no signal is
detected in the HDMI/Composite input. Set to On in “Video Power Save” from the
Setup Menu, which leads to the power save mode.
1. Press the button when in HDMI/Composite mode.
2. Select the “Setup” menu and press the
OK
button.
3. Select “Video Power Save”.
Video Power Save
Off
On
When no signal is detected When signal is input during
On in “Video Power Save”
Condition Indicating Lamp
Power Save Orange Turns On automatically.
When RGB Input is Selected
When the unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set to
be activated automatically when the computer is not being used, in order to reduce the power consumption of the
unit.
RGB sync signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
PC signal Active (normal display) Blank (no display)
Operation mode On Off
Indicating lamp Lights green Lights orange
To return to operating status, operate the personal computer, or press either the Input Select button on the control
panel or the or button on the remote control.
Setup
Video Power Save Off
RGB Input RGB
Color System Auto
Select On/Off Return