Setting picture adjustment – Hitachi UT32A302 User Manual
Page 34
33
SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input
1. Connect to external equipment. (See
18
and
19
for details.)
2. Press the
or
button to switch to HDMI mode.
Press the
or
button to switch to Composite mode.
3. Press the
button.
Setting Picture Adjustment
You can adjust the display condition such as color settings.
Select
"Picture" from Menu list.
Selected Items
Setup hint
Picture Mode
Dynamic You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Dynamic: Suitable for brighter conditions.
Natural : Suitable for normal lighting conditions.
Cinema : Suitable for watching movies.
Natural
Cinema
Contrast
-31~+31
(+32~+40)
This adjusts the contrast to meet the surrounding
brightness by using the
◄►
button.
The maximum value is extended up to [+40] by pressing
the
button for more than 2 seconds at [+31]. The
value between [+32] ~ [+40] appears in magenta. This is
the special feature for dark images, so it is recommended
to set the value less than [+31] under normal conditions.
Brightness
-31~+31
Adjust brightness according to personal preference by
using the
◄►
button.
Color
-31~+31
Adjust color according to personal preference by using the
◄►
button.
Sharpness
-15~+15
Preferred sharpness can be adjusted by pressing the
button for softer image or the
button for sharper image.
Tint
-31~+31
Pressing the
button enhances red and weakens green,
while pressing the
button weakens red and enhances
green. The setup hint is to adjust for realistic skin color.
Color Temperature
Cool You can select from 3 settings depending on the color
condition using the
◄►
button.
Normal
Warm
Back Light
-20~+20 Adjust the brightness of the Back Light for maximum
visibility.
Reset
Each item on this menu screen can be restored to the
factory settings by pressing the
OK
button.
Picture
Picture Mode
Dynamic
Contrast +31
Brightness –31
Color 0
Sharpness +15
Tint 0
Color Temperature Normal
Back Light +20
Reset
Reset
Select OK Set Return
Picture
Dynamic
Contrast Mode
Normal
3D Color Management
Off
Black Enhancement
Off
DNR
Off
MPEG NR
Off
Film Mode
Off
3D Comb Filter
Off
Reset
Reset
Select OK Set Return
Picture
Dynamic
Color Temp. Adjust
Select OK Set Return