Hitachi UT32A302 User Manual
Page 21
20
ENGLISH
3. Attach Cushion, Secure with Clamps and Fit Terminal Cover
1
Attach the supplied cushion around the HDMI cable.
2
Unfasten 2 clamps, and then connect the HDMI cable and power cord
to the monitor through open clamps.
Attach the cushion around
the HDMI cable so as not
to leave any clearance.
Cushion
(supplied
accessory)
HDMI cable
CONNECTION (continued)
2. Connect your Equipment to the Monitor (continued)
Connecting to a PC
The
PC connection terminal (D-sub 15 pin) + the PC (RGB)/DVI Analog Audio Input terminal are connected to
the PC, allowing an analog RGB signal.
NOTE
About the connection of D-sub 15 pin, see
13
for details.
IN
OUT
AUDIO
or
[Example]
(Audio)
(D-sub 15 Pin)
Clamp
HDMI cable
Power cord
This manual is related to the following products: