HP ProLiant BL460c - Manual (Page 3)

Processor Dual-core Intel Xeon 5063 Processor (3.2 GHz MV, 1066 FSB) Mid-Voltage
Dual-core Intel Xeon 5050 Processor (3.0 GHz, 667 FSB) *
NOTE: Intel 5000 series processors are 64-bit, Dual-core, support Hyper Threading, and Intel VT.
NOTE: *Offered through CTO (Factory Integrated Models) only.
Upgradeability Upgradeable to Intel® Xeon® 5100 series Dual-Core processors
Cache Memory 2x2MB Level 2 cache memory
Chipset Intel® 5000P Chipset
Memory Type PC2-5300 Fully Buffered DIMMs (DDR2-667)
Standard 2 GB (2 x 1 GB)
Maximum 16 GB (8 x 2 GB)
NOTE: 8 GB Fully Buffered DIMM option kit will be available shortly to allow a
maximum of 32 GB. Current maximum is 16 GB utilizing 2 GB DIMMs in a 4 GB
Fully Buffered DIMM option kit.
NOTE: Memory must be installed in pairs.
Network Adapter (2) Embedded Dual NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine
One (1) additional 10/100 NIC dedicated to iLO 2 Management
Expansion Slots Two Mezzanine slots
NOTE: Accommodates one Type I mezzanine card and one Type II mezzanine card.
Integrated
Manageability Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Storage Controller Smart Array E200i
Controller 64 MB memory module supports RAID 0,1
Available upgrades: 128 MB with Battery-backed write cache
Maximum Internal
Storage Hot Plug Serial Attach
SCSI (SAS) 144GB SAS 2 x 72GB Serial SCSI
Hot Plug Serial ATA
(SATA) 120GB SATA 2 x 60GB Serial ATA
Graphics Integrated ATI RN-50 1280 x 1024 x 16M color (32 MB DDR1 memory)
QuickSpecs
HP ProLiant BL460c Server Blade
Standard Features (Server Blade)
DA - 12518 Worldwide QuickSpecs — Version 2 — 6/14/2006 Page 3