Harbor Freight Tools 7" Variable Speed Polisher/Sander 69474 - Manual (Page 11)

Page 11 For technical questions, please call 1-800-444-3353. Item 69474
Option 1: using with the D-handle alone
Attach the D-Handle alone to the sides of the Front Cover,
using the Hex Key and two Hex Head Bolts.
note: Slide the Hex Key through the hole in the Handle to access
the Bolt on the long side of the Handle.
Option 2: using with the Side handle alone
Attach the Side Handle to one of the three locations on the
Polisher/Sander head by threading it securely in place.
Option 3: using with Both auxiliary handles together
Hold the D-Handle in place on the head of the Polisher/Sander
and thread the Side Handle through the short side of the
D-Handle in place of one of the Hex Head Bolts. Use a Hex Head
Bolt and the Hex Key to secure the large side of the D-Handle to
the other side of the Polisher/Sander head.
Figure B
Insert Hex Key
through here
to access Bolt
Figure C: D-handle installed
Figure D
Install Side
Handle Here
Or Here
Or Here
Figure e
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup