Hitachi 20CX20B501 - Manual (Page 14)

Using the Remote to Control VCR and Cable Box Functions - 14 -
Quick Reference Functional Key Chart
KEY OPERATES
TV Selects 30, 60, or 90 for
Automatic Turn Off also use to
turn Sleep Timer off by selecting
NO
TV Mutes TV Audio
Access and exit Closed Caption
TV Selects previously tuned channel
Mode Selection
Buttons
TV Selects TV Mode for the remote
control
CABLE Selects Cable Mode for the
remote control
VCR Selects VCR Mode for the
remote control
Standard VCR
Control Buttons
VCR Record
VCR Rewind
VCR Fast Forward
VCR Play
VCR Stop
VCR Pause
VCR
CABLE Selects TV or VCR Mode
Selects A/B Mode
Using the Remote to Control VCR and Cable Box Functions
Remote Control Illustration
Operating the Precoded Function for Your VCR
This remote is designed to operate different types of VCRs. You must first program the remote to
match the remote system in your VCR. (Refer to the VCR Code Index section.)
1. Turn on your VCR.
2. Aim the remote control at the front of your VCR.
3. Press the VCR button to switch to the VCR precoded mode.
4. While holding down the VCR button, enter the 2 digit preset code that matches your VCR.*
The remote will turn on your VCR when the correct 2-digit preset code is entered. When this
occurs, the remote control is programmed for your VCR. If the VCR does not turn off after 5