Hitachi CP-X205 - Manual (Page 101)

27
(YHQW6FKHGXOLQJ
6FKHGXOH6HWWLQJV
6FKHGXOHVHWWLQJVFDQEHFRQ¿JXUHGIURPDZHEEURZVHU
Example: If the IP address of the projector is set to 192.168.1.10:
There are three types of scheduling.
'DLO\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWDVSHFL¿HGWLPHHYHU\GD\
:HHNO\6XQGD\a6DWXUGD\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWWKHVSHFL¿HG
WLPHRQDVSHFL¿HGGD\RIWKHZHHN
6SHFL¿FGDWH3HUIRUPWKHVSHFL¿HGRSHUDWLRQRQWKHVSHFL¿HGGDWHDQGWLPH
‡,Q6WDQGE\PRGHWKH32:(5LQGLFDWRUZLOOÀDVKJUHHQIRUDSSUR[
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [
{ ] or
the breaker in a room is tripped. The POWER indicator will lights orange or
green when the projector is receiving the power.
NOTE
1) Enter "http://192.168.1.10/" into the address bar of the web browser.
(QWHUWKH$GPLQLVWUDWRU,'DQGSDVVZRUGDQGFOLFN[Logon].
&OLFN[Schedule Settings] on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select the [Sunday].
4) Click the [Enable] check box to enable scheduling.
(QWHUWKHGDWHPRQWKGD\IRUVSHFL¿FGDWHVFKHGXOLQJ
&OLFNWKH[Apply] button to save the settings.
7) Click [Add] WRFUHDWHQHZHYHQW$IWHUFRQ¿JXUHWKHWLPHFRPPDQGDQG
parameters, click [Register] to add the new event. To return the previous
page, click [Cancel] button.
8) Click the [Delete] button when you want to delete a schedule.