HP LC3700N - Manual (Page 69)

Changing the TV Settings
Changing the TV Settings 59
Starting EZ Setup
Select EZ Setup to start the first-time setup wizard.
To start EZ Setup:
1 Press Menu on the remote control.
2 Press the Up or Down arrow buttons to highlight
Setup. Press Select.
3 Highlight EZ Setup, and then press Select.
4 If you set the Secret No., enter your 4-digit secret
number. See “Secret number setting for parental
control (AV input mode only)” on page 65.
5 Follow the setup wizard instructions. For more
information, refer to “Using the First-Time Setup
Wizard” on page 29.
Using CH Setup
If the initial setup does not find all the channels, use
CH Setup to manually set the antenna, scan, and find
the channels.
Setting the antenna using Air/Cable
option
The Air/Cable option defines what type of antenna and
cable are connected to the TV analog and digital inputs.
If channels are missing, or no channels are found after
running CH Search, check your antenna connections,
and then perform CH Setup again.
Scanning for channels using CH Search
option
The CH Search option makes the TV look for all
channels viewable from the signals connected to the TV
inputs.
In the CH Search menu, highlight Yes for Analog,
Digital (Air), and Digital (Cable). Then highlight
Search Start and press Select; the scan automatically
searches the selected inputs for channels.
Removing channels using CH Memory
option
Use the CH Memory option to remove channels from
the list of found channels. The removed channel does
not appear when using the Channel buttons.
1 Highlight CH Memory and press Select.
2 Highlight Analog, Digital (Air), Digital (Cable), or
CableCARD, and then press Select.
3 Highlight the channel and press Select.
4 Select Skip, highlight On, and press Select.
■ On removes the channel.
■ Off does not skip the channel.
Using Antenna Setup – Digital
In order to receive digital air broadcasts, you need a
digital broadcast antenna. You can set the antenna
configuration through the Antenna Setting screen.
Adjust for broadcast digital TV signal and channel
strength using the Antenna Setup – Digital option.
■ Signal Strength shows the current and
maximum signal strength.
Fine Sync Manually adjusts the image
from a PC.
Input Label Selects a name (from a list) for
the Input source.
Picture Flip Sets the orientation of the
picture.
Standby Mode Sets the TV mode for standby.
Language Sets the OSD language.
Setup Menu Description
n
The CATV system includes Standard, HRC,
and IRC. Select the one that matches to
your TV.